Loading... Please wait...

J-Head MK V-BV Hot End - .35mm - 3.0mm

Hover over image to zoom

  • Image 1
$59.95
SKU:
JH353

 Product Description

This product is no longer available.

J-Head MK V-BV Hot End - .35mm - 3.0mm

The J-Head MK V-BV from www.HotEnds.com is one of the most reliable and successful designs for DIY 3D printers. This hot end has a 0.35mm nozzle and works with 3mm filament.

Kit includes the following:

  • J-Head Mk V-BV Hot End
  • Resistor heater - 12v
  • Thermistor - Semitec
  • PTFE Liners (x2)

Kit does NOT include:

  • Cartridge heater - 12v or 24v (choose)
  • Thermistor - Epocs
  • Heat Shrink (x7)
  • Pre-terminated 22/2 thermistor wire 1000mm
  • Wire Ferrules (x4)
  • Small pack Muffler Putty

We highly recommend the J-Head Mk V-BV, Wiring Kit + Cartridge Heater!

Note: PEEK body color may be tan or black.  UltiBots resells the J-Head from www.hotends.com. You can cut the leadwire from the cartridge heater and solder/crimp to the 12v resistor heater.

 Find Similar Products by Category

 Product Reviews

  1. Nice Part

    Posted by Mike on 5th Dec 2013

    This head works nice. It heats fast and feels solid. I've put over a roll of ABS through it now and it is doing great. Well worth the money.


  2. Be sure to clean before first use.

    Posted by Wes on 24th Jul 2013

    First let me start by saying the support Brad provides is top notch! I bought the MendelMax 1.5 kit with this head. I got it all built and was so excited to use it. That soon turned to frustration when half way into printing a calibration cube my extruder clogged. First I blamed the filament and finally after playing with it for hours I bit the bullet and pulled my newly installed head and cleaned it. (if you have ever had to do this you know what a pain it is). I was amazed when I found a ton of brass shavings. This is from the machining process of the brass hot end. The way it was packaged led me to think the head way ready to go. This was not a fluke as a friend purchased the same kit with this same head and his was full of shavings as well. Thankfully I told him to check it before he tried to use it. All and all the head is great. Just this little issue caused me at least 6 hours of down time trying to make it work correctly and finally cleaning the head.


  3. flawless operation so far

    Posted by Jim on 12th Mar 2013

    have about 20 meters of black and 10 of natural PLA through it and not a single hitch. heats up quickly, and achieves rock-steady temps. quick delivery as well. couldn't be happier with this purchase.


You Recently Viewed...

 

Follow us on

Copyright 2017 UltiBots LLC. All Rights Reserved.
Sitemap |

Click the button below to add the J-Head MK V-BV Hot End - .35mm - 3.0mm to your wish list.