Loading... Please wait...

D300VS-PLUS 3D Printer - DIY Kit

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
RRP: $1,199.95
$1,099.95 (You save $100.00)
SKU:
D300VSP
Shipping:
Calculated at checkout

 Product Description

D300VS-PLUS 3D Printer - DIY Kit

The D300VS-PLUS DIY Printer Kit is BIG with a 300mm heatbed and 445mm max Z! Its all metal frame is RIGID using 2040 towers. At its heart is the E3D Titan Aero and Duet Wifi motion controller with its awesome WEB based interface.

  • BLACK METAL CORNERS
  • BLACK METAL EXTRUSION
  • 2040 TOWERS
  • SLS NYLON CARRIAGES/EFFECTOR
  • TRICK LASER BALL CUP ARMS
  • E3D TITAN AERO EXTRUDER
  • DUET WIFI MOTION CONTROLLER
  • DUET3D PANEL DUE LCD CONTROLLER
  • AWESOME WEB INTERFACE
  • FSR AUTO-CONFIGURATION
  • KAPTON HEATED BED
  • 0.9° NEMA MOTORS
  • LED LIGHTING
  • BALL BEARING BLOWER PART FAN

Our community is active! Lots of great Photos good conversation on Facebook.

Nothing quite captures the imagination like a Delta style 3D printer in action.  The UltiBots D300VS-PLUS is a fun kit to assemble and print from.  It has a 300mm heated bed with an aluminum heat spreader and Kapton Heater. This kit uses a E3D Titan Aero mounted to the SLS Nylon effector.  This lightweight, proven and prints flexible materials like NinjaFlex and TPU.  It is unlike Bowden tube style extruders because the filament is fed directly into the E3D Hot End. Together with V-Slot extrusion and wheels this kit is straight forward and less complicated to build compared to many FFF 3D printers.

NOTE: Orders placed today ship in 1 week or less!!!

PERSONAL SUPPORT DURING YOUR BUILD, LEVELING, AND CALIBRATION IS AVAILABLE ON OUR FORUM. THE D300VS GUIDE COVERS 75% OF THE BUILD AND SHOULD BE USED AS A PRIMARY SOURCE. REFERENCE THE PLUS DRAFT GUIDES AND OR FORUM FOR DIFFERENCES. THE PLUS GUIDE IS IN DEVELOPMENT.

 
Specifications
  • Heated Bed = 300mm Diameter
  • Build Area = 290mm cylindrical x 460mm Peak Z*** (11.5" x 18.1")
  • Useable Print Speed: 150mm/sec (7.9in/sec)
  • X Y Print Tolerance: 0.005 mm (5 Micron)
  • Layer Thickness: 100 – 400 micron depending on nozzle (0.1mm - 0.4mm) (.004" - .016")
  • Tested Filament: 1.75mm ABS, PLA, NinjaFlex, TPU, PETG, and HIPS
  • Overall Dimensions (WDH): 550mm x 550mm x 1020mm (21.65in x 21.65in x 40.16in)
  • Weight: 10kg (22.2lbs)
  • Power Requirements: 110 - 220 VAC, comes with switchable PSU and USA power cord
  • Maximum operating temperature: 295C Extruder & 110C Heated Bed
  • Shipping dimensions (WDH): 103cm x 37cm x 18cm (41in x 15in x 7in)
  • Shipping weight: 15.5 kg (34 lbs)
  • Specifications subject to change

The D300VS+ Kit uses top quality components including:

This kit in addition, includes:
  • Pre-terminated wiring with braided sleeving
  • 3 endstop kits
  • Extra connectors and heatshrink for customization
  • 1 parts cooling fans
  • Power cord, receptacle, switch & wiring
  • USB 2.0 cable - mini

We recommend these other items:

*** Not all companies publish Z height correctly. Z height varies from the Peak Z to the Perimeter Z. Be sure to research and compare TRUE Z heights. D300VS Peak Z = 460mm and Perimeter Z = 410mm. Peak Z = max Z height when all carriages are in the home position. Perimeter Z = max Z height when the print nozzle is over the outer perimeter and one carriage is in the home position.

D300VS ReadMeFirst

D300VS Build Guide

UltiBots Forum

UltiBots Printers Facebook Group

D300VS on Thingiverse

D300VS GitHub STLs

Kossel Gallery of Prints & Printers

THIS PRINTER IS NOT AN ORDINARY PIECE OF CONSUMER ELECTRONICS. BUILDING THIS KIT REQUIRES FAMILIARIZATION WITH HAND TOOLS, BASIC SOLDERING, ELECTRONICS, SOFTWARE INSTALLATION AND CONFIGURATION. DURING INITIAL CALIBRATION THIS KIT REQUIRES SOME PATIENCE AND PRACTICE TO SETUP AND OPERATE WELL.  BEING THAT THIS KIT IS A REPRAP DERIVATIVE, THERE IS A STRONG SUPPORT COMMUNITY WITH LOTS OF EXPERIENCE AND ADVICE.  AS ALWAYS ULTIBOTS WILL HELP YOU BE SUCCESSFUL AND ACHIEVE QUALITY PRINTS. THIS PRINTER IS NOT A TOY AND DEATH OR INJURY / DAMAGE TO PROPERTY CAN RESULT FROM USE OR MISUSE.  YOU SHOULD FULLY UNDERSTAND OUR TERMS BEFORE PURCHASING.

 Product Videos

UltiBots Kossel 250 V-Slot Large Print
  • UltiBots Kossel 250 V-Slot Large Print
  • 3D printing TRex skull
  • 3D printing the millennium falcon

 Find Similar Products by Category

 Product Reviews

  1. Not even done with construction!!!

    Posted by Rob on 18th Mar 2018

    I'm impressed with just how accurate and solid the frame is. Everything is cut so evenly that just simple pressure (paracord strap) used to hold the base and top triangles made everything come out perfectly triangular.

    After having fought with other kits where you have to gap the corners and fiddle, I'm looking forward to the first calibration run of this one.


  2. Best Hardware Kit on the Market, Skill Required

    Posted by Mike on 29th Jan 2018

    This is my 5th printer (6th if you count the MMU upgrade to my MK2S). It is hands down my favorite (contenders are Prusa MK2S MMU, Formbot T-Rex 2+, Wanhao Duplicator 6, and Prusa MK3).

    The state of the build instructions are frankly a mess. The instructions for the original D300VS are great. The instructions for the PLUS portions are scattered across three different documents and are not as well documented. But they are crowd-sourced so should get better over time.

    This is my only delta style printer and my first complete assembly from kit (the Prusa MK3 showed up the week after this).

    I managed to break the effector and Brad was kind enough to quickly ship me a replacement. Ultibots customer support is fantastic. As is the community. The Facebook group gets speedy answers to questions but at the cost of the forums. I myself am guilty of not posting as much to the forums as I should (as always, use the search function on the FB group before asking a question).

    The printer is very accurate and reliable, with a quick caveat on the Titan Aero: when it jams (probably my fault both times) it's not as easy to clear (need to remove the part cooling fan, duct, hotend fan and then the heatsink). But the prints have come out great so far. Only mods I've done was to print the fan duct in color changing ABS (I broke the original part, and seeing the cool air fight heat creep from the hotend is mildly entertaining) and replaced both fans. I put a Noctua 4020 (twice as thick for decent CFM) and a higher CFM and quieter blower fan (sleeve bearing, so I'll replace it in a year or so). The stock fans aren't loud but are deafening compared to the rest of the printer and the MK3 beside it.

    The product quite clear states that the build notes are a work in progress and that the build is not for beginners and requires tools and soldering skills. That's completely accurate. But the result is a printer that is completely worth the effort to get up and running.


  3. D300VS Plus

    Posted by Brock Holley on 26th Jan 2018

    This printer is one of the best values in DIY printers. I have built the D300VS original for a printer at work and now have purchased the D300VS Plus for a printer at home. The improvement that have been made to this printer make it way better than the original. This printer has good quality parts and it is capable of very good print quality. After taking the time to tune it in, it will print very close tolerance parts. I would highly recommend this printer to someone that is looking for a high quality printer at a reasonable price. By far one of the best values out there.


  4. Amazing product

    Posted by Unknown on 8th Dec 2017

    By far the best kit i have ever assembled. all parts and bags where clearly marked. Instructions where easy to follow and the Facebook community and forums where a valuable resource. Great customer service too boot. This is a complete kit, no upgrades needed with very detailed print quality right out of the box.


  5. Best That You Can Buy!!

    Posted by Matt M. on 29th Nov 2017

    What can i say but WOW! For the price there is no better otoion for a 3d printer. Print quality is spectacular and the Duet controller with screen makes setting up prints a breeze. Granted there are some setup steps and learning required if its your first 3d printer or Delta style printer but there is an amazing community that is very fast to help and Brad has some of the best customer service you will find from any company.
    Id recommened this printer to anyone looking for the best parts, price, and customer service around. With the note that you should be comfortable with soldering and assembling a 3d printer kit.


You Recently Viewed...

 

Follow us on

Copyright 2018 UltiBots LLC. All Rights Reserved.
Sitemap |

Click the button below to add the D300VS-PLUS 3D Printer - DIY Kit to your wish list.