Loading... Please wait...

24v Kapton Heater - 240mm x 310mm

Hover over image to zoom

  • Image 1
Calculated at checkout

Sorry but this item is currently unavailable. Please check back at a later stage.

 Product Description

24v Kapton Heater - 240mm x 310mm

  • Size: 240mm x 310mm with 1cm hole in center
  • Voltage: 24
  • Watts: 200 +/- 5%
  • Resistance: 2.88 +/- 5%
  • Leads: 750mm
  • Lead location: center thermister, middle edge for power
  • Adhesive: 3M 467MP or equivalent
  • Thermistor: 100K with PTFE
  • Thermistor leads: 750mm terminated .1" connector
Thermistor with leadwire is included.  In Marlin uncomment // 11 is 100k beta 3950 1% thermistor (4.7k pullup)

 Find Similar Products by Category

 Product Reviews

  1. Good heater. Could use larger wires for the heater line.

    Posted by Nick F. on 13th Feb 2016

    This is my second Ultibots kapton heater (first was for a delta) and like the first, the quality is great & cost reasonable.

    I was worried that the 250mm x 400mm x 5mm aluminum bed I stuck it to was going to be slow to heat given the mass, but this heater gets it to 60C in a minute or two. I'm powering it via the 24V 400W supply from Ultibots, through a v1.5 RADDS board. I reinforced the thermistor bead by gluing it to the bed itself with Artic Silver; it is now extremely secure and responsive.

    The only minor drawback is that it seems like the 18GA wires are too small / too long for the current that is running through this bed - they get hot during use and could probably be an issue if they weren't getting air circulation. They are long (1m?), so cutting a 25cm or so off of them reduces the problem, cutting more would probably solve it completely. Long term, I will likely re-wire the bed with 14GA wire.

  2. great product

    Posted by Rob on 10th Sep 2015

    I really like the all integrated heater. thermistor and connections attached securely

  3. Works great

    Posted by Unknown on 15th Apr 2015

    At first I was wary about purchasing this because it had not been rated yet at the time of purchase. Heats up in 7 minutes and has pretty even heat distribution, with the aluminum spreader only + / - a degree difference in spots. Thank you for the great product.

You Recently Viewed...


Follow us on

Copyright 2019 UltiBots LLC. All Rights Reserved.
Sitemap |

Click the button below to add the 24v Kapton Heater - 240mm x 310mm to your wish list.