Loading... Please wait...

170mm Heat Bed Kit

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
Calculated at checkout

 Product Description

170mm Heat Bed Kit

This kit includes the following:

Borosilicate Print Surface - 170mm Round


  • Brand = Borofloat
  • Dimension = 170mm
  • Thickness = 3.3mm (.129")
  • Edges = seamed

Note: On larger heat beds, Boro is typically placed over an aluminum heat spreader.

Kapton Heater - 160mm Round

This is a 24V, 220W Kapton Heater that measures 160mm round.  It fits nicely with our 170mm round borosilicate print surface. 

  • size: 160mm with 1cm hole in center
  • voltage: 24
  • watts: 220
  • resistance: 2.6 ohms
  • lead length: 1000mm
  • lead wire: AWM 3239 18AWG 150°C
  • lead location: center
  • thermistor: 100K QWG-104F-3950 preferred
  • thermistor location: center with 1000mm leads
  • adhesive: 3M 467MP or equivalent

Thermistor with leadwire is included.  In Marlin uncomment // 11 is 100k beta 3950 1% thermistor (4.7k pullup)

Aluminum Heat Spreader - 170mm Round

This laser cut heat spreader fits nicely with our Borosilicate Glass and Kapton Heater.

Heat spreader thickness: 1.6mm

Note: One side of spreader has plastic coating to protect surface.  Remove and apply heater to this side.  Also, we don't recommend printing directly to glass as the glass may get damagaged from parts adhering too hard.  We recommned printing on PET tape with ABS juice, PVA juice, or other coating.

 Find Similar Products by Category

 Product Reviews

  1. Nice upgrade from cold glass and tape

    Posted by Jake Henak on 10th Jun 2015

    Bought this to allow printing of ABS on my smaller Kossel mini. Works great.

  2. Very good

    Posted by Nazek Osman on 4th Apr 2015

    Ordered this head bed in January for my modified RichRap 3DR. Have about 456 hours of printing on it and it has been working great! Heats up in a few minutes and maintains heat very well. I mounted it on a round MDF board with a groove routed on it for the wires. Attached it to the MDF board with some counter sunk screws. Again, works very very well.

You Recently Viewed...


Follow us on

Copyright 2019 UltiBots LLC. All Rights Reserved.
Sitemap |

Click the button below to add the 170mm Heat Bed Kit to your wish list.